WALLIE MOUNTS~ AESTHETIC SKATEBOARD DISPLAY MOUNT
WALLIE MOUNTS~ AESTHETIC SKATEBOARD DISPLAY MOUNT
~ Skater Owned Company, Made in The USA~ California
STEP 1
• Drill a hole with a 11/64 drill bit to install the anchor
• Place screw into the anchor and tighten 3/4th of the way
STEP 2
• Place the WALLIE MOUNT on the screw and tighten all the way
• Once you are sure the unit is placed straight or at the desired angle, you can repeat STEP 1 for the second screw
STEP 3
• Hang your board by placing them onto the rods
STEP 4
• Put the O-Rings onto the rod’s to secure your board into place
STEP 5
• Stand back and admire the Radness!!! Then come back and get a bunch more so you can cover your walls in decks!! ~ Sk8 or Die!!!
* FREE SHIPPING !!!
Wallie Mounts is dedicated to providing skateboard collectors with a stylish and functional way to display their collectible decks.
Hang with confidence knowing the rods are nylon reinforced with glass, giving plenty of strength to hold any board.
At 2.38 Inches wide x 3.24 Inches long the Mount takes up the same area as the baseplates of skateboard trucks.
Mount can be hung vertically, needing one unit for vertical graphics, or use two units to display a board with horizontal graphics.
With glass reinforced nylon rods measuring at 2.5 Inches long, everything from steep concave boards to old school shapes can be hung with a Wallie Mount.
Every unit comes with; O-rings and Nuts for the rods, as well as 2 screws and anchors to attach to the wall
WALLIE MOUNTS~ AESTHETIC SKATEBOARD DISPLAY MOUNT
~ Skater Owned Company, Made in The USA~ California
STEP 1
• Drill a hole with a 11/64 drill bit to install the anchor
• Place screw into the anchor and tighten 3/4th of the way
STEP 2
• Place the WALLIE MOUNT on the screw and tighten all the way
• Once you are sure the unit is placed straight or at the desired angle, you can repeat STEP 1 for the second screw
STEP 3
• Hang your board by placing them onto the rods
STEP 4
• Put the O-Rings onto the rod’s to secure your board into place
STEP 5
• Stand back and admire the Radness!!! Then come back and get a bunch more so you can cover your walls in decks!! ~ Sk8 or Die!!!
* FREE SHIPPING !!!
Wallie Mounts is dedicated to providing skateboard collectors with a stylish and functional way to display their collectible decks.
Hang with confidence knowing the rods are nylon reinforced with glass, giving plenty of strength to hold any board.
At 2.38 Inches wide x 3.24 Inches long the Mount takes up the same area as the baseplates of skateboard trucks.
Mount can be hung vertically, needing one unit for vertical graphics, or use two units to display a board with horizontal graphics.
With glass reinforced nylon rods measuring at 2.5 Inches long, everything from steep concave boards to old school shapes can be hung with a Wallie Mount.
Every unit comes with; O-rings and Nuts for the rods, as well as 2 screws and anchors to attach to the wall
WALLIE MOUNTS~ AESTHETIC SKATEBOARD DISPLAY MOUNT
~ Skater Owned Company, Made in The USA~ California
STEP 1
• Drill a hole with a 11/64 drill bit to install the anchor
• Place screw into the anchor and tighten 3/4th of the way
STEP 2
• Place the WALLIE MOUNT on the screw and tighten all the way
• Once you are sure the unit is placed straight or at the desired angle, you can repeat STEP 1 for the second screw
STEP 3
• Hang your board by placing them onto the rods
STEP 4
• Put the O-Rings onto the rod’s to secure your board into place
STEP 5
• Stand back and admire the Radness!!! Then come back and get a bunch more so you can cover your walls in decks!! ~ Sk8 or Die!!!
* FREE SHIPPING !!!
Wallie Mounts is dedicated to providing skateboard collectors with a stylish and functional way to display their collectible decks.
Hang with confidence knowing the rods are nylon reinforced with glass, giving plenty of strength to hold any board.
At 2.38 Inches wide x 3.24 Inches long the Mount takes up the same area as the baseplates of skateboard trucks.
Mount can be hung vertically, needing one unit for vertical graphics, or use two units to display a board with horizontal graphics.
With glass reinforced nylon rods measuring at 2.5 Inches long, everything from steep concave boards to old school shapes can be hung with a Wallie Mount.
Every unit comes with; O-rings and Nuts for the rods, as well as 2 screws and anchors to attach to the wall